• TPU Filament for Flexible 3D Printing: Formulation, Compounding, Extrusion & Printability

    Optimize TPU filament formulation for flexible 3D printing, covering TPU 95A/90A, high-flow grades, extrusion, drying and printability.

6 Month Access

Get full access to the complete training and stay connected to the training ecosystem for 6 months.

Training Certificate

Validate your expertise with a verifiable credential that employers trust and recognize.

Training Materials

Download presentation slides, expert-prepared FAQs, Q&A, practical toolkits and more.

Expert Connect

Connect with the expert 24/7 via the discussion forum to clarify your technical questions.

Develop TPU Filament That Delivers Flexibility Without Sacrificing Printability.

TPU filament has become one of the most widely used flexible 3D printing materials for applications requiring elasticity, impact resistance, abrasion resistance and repeated deformation. From TPU 95A and TPU 90A softer filament grades to high-flow formulations and functional compounds, material developers are being asked to deliver greater flexibility while maintaining reliable feeding, extrusion and layer formation.


But successful TPU 3D printing starts long before nozzle temperature, print speed or retraction settings are selected. Polyester or polyether TPU chemistry, hard and soft segment balance, molecular weight, Shore hardness, melt rheology, moisture content, additives and filament extrusion conditions all influence how a flexible filament feeds, melts, flows and bonds between layers.


A softer TPU may provide excellent elastic recovery but become difficult to feed consistently. A high-flow TPU or high-speed TPU filament may support faster printing but require careful control of melt strength, cooling and dimensional stability. Reinforcing or functional additives used in conductive TPU filament, carbon fiber-reinforced TPU and flame-retardant TPU can further alter viscosity, flexibility, surface quality and interlayer adhesion.


This advanced expert-led training focuses on TPU filament formulation, compounding, filament extrusion and material-to-printer interactions. Participants will examine how polymer chemistry and processing choices influence flexibility, filament stiffness, melt flow, TPU stringing, layer adhesion, under-extrusion, moisture sensitivity and final printed-part performance. The objective is not simply to determine better TPU print settings. It is to understand how to engineer a flexible 3D printing filament that provides a wider and more consistent processing window.


What Problem This Training Solves

  • Soft TPU can become difficult to feed consistently

  • Higher melt flow can compromise filament stability

  • Moisture can quietly degrade TPU before printing

  • Stable diameter does not guarantee stable extrusion

  • Additives can disrupt flexibility and layer adhesion

  • Printer settings cannot compensate for poor formulation

  • Higher print speed changes the required rheology

  • Functional fillers can narrow the processing window


Why Attend?

  • Formulate TPU filament for targeted hardness

  • Select between TPU 95A, 90A and softer grades

  • Develop high-flow TPU for faster printing

  • Improve filament extrusion and dimensional consistency

  • Control TPU moisture and drying requirements

  • Troubleshoot TPU stringing and layer-adhesion problems


Who Should Attend?

This advanced training is particularly relevant for:

  • TPU and thermoplastic elastomer formulators

  • 3D-printing filament development scientists

  • Polymer compounding and extrusion engineers

  • Additive-manufacturing materials R&D teams

  • TPU raw-material and additive technical specialists

  • Application engineers developing flexible printed components


Training Outline

  • TPU Chemistry for Flexible 3D Printing Filament

  • TPU 95A, TPU 90A and Softer Filament Design

  • High-Flow TPU and High-Speed TPU Filament

  • TPU Filament Compounding and Functional Additives

  • Conductive, Reinforced and Functional TPU Filament

  • TPU Filament Extrusion and Diameter Control

  • TPU Drying, Moisture and Hydrolysis Control

  • TPU Stringing, Feeding and Under-Extrusion

  • TPU Layer Adhesion and Printed-Part Performance

  • Case Studies

  • Expert Q&A Session


Move Beyond Generic TPU Print Settings.

Learn how TPU chemistry, filament formulation, compounding and extrusion determine the real processing window behind reliable flexible 3D printing. Develop TPU filament with the right balance of hardness, melt flow, feeding stability, layer adhesion and final-part performance. Register Now.

Trainers List

Training Curriculum

Get Started Now!

Related Trainings